3Com TokenLink VelocityTM XL PCI Network Interface Card manual Select OK on the Mpts logo panel

Installing a Driver for Various IBM Environments 5-3

9Enter the path of the temporary directory for the OEMSETUP.INF file:

c:\temp

10The 3Com TokenLink Velocity XL PCI NIC is selected. Press Enter.

11Enter the machine ID, user name, and domain name.

12Press Enter to accept the list of options chosen.

13Finish installing files from the IBM DOS LAN Services diskettes.

14If you are using the 3.5-inch TokenDisk diskettes, insert TokenDisk diskette #1 in the drive.

15Copy the microcode file TLNKP.MAC from the TokenDisk to your hard drive. For example, if you are using the 3.5-inch TokenDisk diskettes, enter:

copy a:\tlnkp.mac c:\net

If you are using the TokenDisk CD, substitute the appropriate drive in the microcode file’s path.

This completes the driver installation for IBM DOS LAN Services. Restart your computer and install your host connectivity application.

Using IBM MPTS to Install a Driver for OS/2

If your OS/2 network operating system has not yet been installed on your computer, install it now and follow its instructions for installing device drivers. If an OS/2 network operating system has previously been installed, follow the instructions here for using IBM Multiprotocol Transport Services (MPTS) to install device drivers.

1Start IBM MPTS by performing either of the following actions:

■From the OS/2 desktop, double-click the MPTS icon.

■From an OS/2 window, go into the IBMCOM subdirectory and at the OS/2 prompt, enter:

mpts

2Select OK on the MPTS logo panel.