Installing a NetWare Server Driver

3-13

Installation Instructions

This section has instructions for installing TLNKPODI in two ways:

On a file server in an existing NetWare environment running NetWare 3.12 or 4.1x. These instructions also apply to a new installation or upgrade to NetWare 3.12.

As part of a new NetWare 4.1x installation or an upgrade to NetWare 4.1x.

Instructions in this section are written for TokenDisk diskettes. If you are using the TokenDisk CD, substitute the appropriate path where required.

Installing the Driver in an Existing

NetWare Environment

This section explains how to install TLNKPODI on a file server already running NetWare 3.12 or 4.1x. The instructions in this section should also be used for a new NetWare 3.12 installation or an upgrade to NetWare 3.12.

If you are in the process of upgrading to NetWare 4.1x, proceed to “Installing the Driver as Part of a New Server Installation or Upgrade to NetWare 4.1x.”

TokenDisk diskette #1 contains the server driver and versions of Novell NetWare Loadable Modules (NLMs) required for all NetWare 4.1x-compliant server drivers. You must use these NLMs, or more recent versions, with TLNKPODI.

Table 3-1 shows the names, locations, and versions of the support modules.

Table 3-1Location of NetWare Support Modules

NetWare

Version Directory

4.1x \NETWARE\NWSERVER\4.1x\MSM.NLM \NETWARE\NWSERVER\4.1x\NBI.NLM \NETWARE\NWSERVER\4.1x\TLNKPODI.INF \NETWARE\NWSERVER\4.1x\TLNKPODI.LAN \NETWARE\NWSERVER\4.1x\TLNKPODI.LDI \NETWARE\NWSERVER\4.1x\TOKENTSM.NLM

3.12\NETWARE\NWSERVER\3.12\MSM31X.NLM

\NETWARE\NWSERVER\3.12\NBI31X.NLM

\NETWARE\NWSERVER\3.12\TLNKPODI.LAN

\NETWARE\NWSERVER\3.12\TOKENTSM.NLM

Page 43
Image 43
3Com TokenLink VelocityTM XL PCI Network Interface Card manual Installation Instructions