The samples below show the server console display when two 3C359 NICs are installed.
This is the Load/Bind sequence for the first of two NICs:
FS1:load c:tlnkpodi
Loading module tlnkpodi.lan 3Com TokenLink PCI Server MLID Version 1.00c [date]
(C)Copyright
Supported slot values are 1,2 Slot: 1
Data Rate = 16 Mbps. Max Packet Size = 17954 IO Address Base = F480
Memory Basic Address = FF9EFE800 IRQ = 10
Number of transmit buffers (DPDs) configured = 5. Number of receive buffers (UPDs) configured = 3. MicroCode Version String = 01.20 10/20/97
The supported slot values shown are for the two 3C359 NICs in the server. The next line is where you enter the address that you will use.
This is the Load/Bind sequence for the second of two NICs:
FS1:load c:tlnkpodi
Do you want to add another frame type for a previously loaded board? n
Supported slot values are 4
Slot: 4
Data Rate = 16 Mbps.
Max Packet Size = 17954
IO Address Base = EC80
Memory Basic Address = FFDFFC00
IRQ = 11
Select board to bind:2
IPX LAN protocol bound to 3Com 3Com TokenLink PCI Server MLID FS1:
Once you have determined the values for the NICs installed in the server, you can use the SLOT= parameter to load the driver either from the command line or by placing the load command in the AUTOEXEC.NCF file to load automatically each time the server is started.
