3-6CHAPTER 3: NOVELL NETWARE ENVIRONMENTS

Installing DOS Client32

This section describes installing the TLNKPODI.LAN DOS Client32 driver for a NetWare Client32 environment. For the driver installation procedure, you need the Novell Client32 diskettes and either the TokenDisk CD or TokenDisk diskette #1.

1Insert the Novell Client32 setup diskette #1 into a drive, switch to that drive, and enter the Install command. For example, if the diskette is in drive A, enter:

a:\install

2Read the Novell information window and press Enter. The displayed window lists installation options.

3Use the arrow keys to move to the options you need. Press the spacebar to select the option.

The system prompts you for configuration information.

4Confirm the configuration and press Enter.

5If your configuration requires TCP/IP, supply the IP Address, Router, Subnetmask, DNS Domain, and Domain Name Server Address. Press Enter.

6When prompted for the LAN Driver type, select 32-bit and press Enter.

The 32-bit Network Board Drivers window is displayed.

7When prompted to select the driver, scroll to User specified 32-bit driver.

8Insert TokenDisk diskette #1 in the drive or the TokenDisk CD in the CD-ROM drive. Enter the following path:

<drive>:\netware\client32

9Select TokenLink Velocity XL PCI and press Enter. The system allows you to change the configuration.

10To change a parameter, select it and press Enter. Type the new value. When you are finished changing parameters, press Enter.

Page 36
Image 36
3Com TokenLink VelocityTM XL PCI Network Interface Card manual Installing DOS Client32, Drive\netware\client32