3Com TokenLink VelocityTM XL PCI Network Interface Card manual

Installing a DOS 16-Bit Client Driver 3-3

3If you are using the 3.5-inch diskettes, insert TokenDisk diskette #1 in the drive and enter:

a:

If you are using the TokenDisk CD, insert it in the CD-ROM drive and enter the drive letter. For example:

d:

4Enter: autolink

An AutoLink information window is displayed.

5From the AutoLink Information window, press Enter.

The first time you use AutoLink, the 3Com software license appears.

6To accept the terms and conditions, enter: y

To view the full text of the license agreement, press F1.

7When the information window appears, press Enter to continue.

A status message appears, followed by a prompt for the ring speed of your network.

8Enter the ring speed.

9When the auto installation process is finished, remove the TokenDisk diskette or TokenDisk CD and restart your PC.

The login prompt for a NetWare server appears.

10Log in to the NetWare server with your ID and password.

Your PC is now configured as a NetWare DOS ODI client.

If you experience problems using AutoLink, see the next section, “AutoLink Troubleshooting.” If you cannot connect to the NetWare server after running AutoLink, see Chapter 6, “Troubleshooting.”