3Com TokenLink VelocityTM XL PCI Network Interface Card Changing Configuration for Multiple NICs

Changing Configuration for Multiple NICs B-5

Boot ROM

To use this option, you must have installed the

3C359-TRIROM in the boot ROM socket on the NIC. (The 3C359-TRIROM must be ordered separately. See installation instructions in the TriROM user guide.) When enabled, the NIC allows the system to access BootWare residing in the TriROM, enabling the PC to boot (with or without a hard drive) remotely from a LAN server in TCP/IP, NetWare, and RPL environments. The default setting is Disabled.

Memory Limit of 1 Megabyte

When disabled (set to No Limit), the MMIO address space can be mapped above the standard conventional memory address limit of 1 megabyte.

Changing Configuration for Multiple NICs

If you have more than one 3C359 NIC in your PC, you must select the NIC you want to configure.

From the DOS Configuration and Diagnostic Program menu (Figure B-1), press Tab to select the Select pull-down menu. Select the 3C359 NIC you want to configure. Continue with configuration instructions as described earlier in this appendix.