6Insert the IBM LAN Support Program diskette in the drive when prompted.
The Primary Adapter Driver shown is 3Com TokenLink Velocity XL PCI.
7Press F4 to install the driver.
8If you are using the
This completes the installation of DXMAID and the DOS NDIS 2.01 driver. Restart your computer and install your host connectivity application.
Installing a Driver for IBM DOS LAN Services
Follow these steps to install the NDIS 2.01 driver for IBM DOS LAN Services for IBM LAN Server 4.0 or IBM Warp Server:
1Create a temporary directory on your DOS PC. For example, enter:
mkdir c:\temp
2If you are using the
3Copy the following files from the TokenDisk diskette to the temporary directory. For example, enter:
copy a:\ndis2\dos\oemsetup.inf c:\temp copy a:\ndis2\dos\tlnkpn2.dos c:\temp
If you are using the TokenDisk CD, substitute the appropriate drive in the path.
4Insert IBM DOS LAN Services diskette #1 in the drive.
5From the DOS prompt, enter: a:\install
6Press Enter when the welcome screen is displayed.
7Press Enter to accept the default directory C:\NET as the location to install IBM DOS LAN Services.
8From the list of network cards presented, select Network Card Not Shown In List Below.
