Yamaha CDX-97 Unpacking, Battery installation, Remote control operation range, CDX-497CDX-397

UNPACKING

Carefully remove this unit and accessories from the box. You should find the unit itself and the following accessories.

English

Remote control

(CDX-497)(CDX-397)

	OPEN/CLOSE				OPEN/CLOSE
1	2	3	4	1	2	3	4
5	6	7	8	5	6	7	8
9	0		INDEX	9	0		INDEX
DIMMER		RANDOM		DIMMER		RANDOM
REPEAT	A–B	PROGRAM	CLEAR	REPEAT	A–B	PROGRAM	CLEAR
SYNCHRO	TAPE	PEAK	SPACE	SYNCHRO	TAPE	PEAK	SPACE
	SEARCH				SEARCH
TIME/INFO				TIME/INFO
	FOLDER
FILE	ENTER	FILE
			OUTPUT
			LEVEL

Audio pin cable

Batteries (AAA, R03, UM-4) x 2

FOLDER

NOTES ABOUT THE REMOTE CONTROL

Battery installation

1.Turn the remote control over and remove the battery compartment cover by sliding it in the direction of the arrow.

2.Insert the batteries (AAA, R03, UM-4) according to the polarity markings on the inside of the battery compartment.

3.Close the battery compartment cover.

Press %

Remote control operation range

Remote control

sensor

Within approximately 6 m

30°	°
	30

Battery replacement

If you notice that the remote control must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones.

Notes

●Use only AAA, R03, UM-4 batteries for replacement.

●Be sure the polarities are correct. (See the illustration inside the battery compartment.)

●Remove the batteries if the remote control is not used for an extended period of time.

●If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

Notes

●There should be no large obstacles between the remote control and the main unit.

●If the remote control sensor is directly illuminated by strong lighting (especially an inverter type fluorescent lamp etc.), the remote control might not work properly. In this case, reposition the main unit to avoid direct lighting.

3 En