Changing brightness of the display
English
You can change brightness of the display in three degrees by pressing DIMMER.
Normal illumination
DIMMER
Slightly dim
Dim
Automatic spacing
If you record a disc onto tape with an insufficient time space between tracks, the tape deck will not be able to perform blank search operations on the tape correctly. To enable a track search operation, use this function to add an interval of about 4 seconds between tracks.
Press SPACE to light up the current setting.
SPACE
Light up about 3 seconds.
While the current setting is lit up, press SPACE to change the setting between "AUTO SPACE ON" and "AUTO SPACE OFF".
Notes
●When the automatic spacing function is in effect, the display of the total time and of the total remaining time includes each interval of the 4 seconds between tracks.
●When the automatic spacing function is in effect during the playback, "AUTO SPC 4" (the remaining seconds of the interval) appears and is counted down each time blinking at the interval between the tracks.
Adjusting the output level (CDX-497 only)
You can adjust the level of signals output to the amplifier by pressing OUTPUT LEVEL
When you listen with headphones, connect the headphones to the PHONES jack.
OUTPUT
LEVEL
