Random sequential tape-programming (for Audio CD)
The unit automatically programs tracks in random sequential order for recording to tape.
DIMMER |
| RANDOM |
| 2 |
REPEAT | PROGRAM | CLEAR | ||
SYNCHRO | TAPE | PEAK | SPACE |
|
SEARCH
3, 4
English
TIME/INFO
FOLDER
1 Follow steps 1 – 3 on page 16.
2 Press RANDOM.
RANDOM
*The unit automatically programs tracks at random for both side A and side B considering the total time of the tape.
3 Start recording on the tape deck, and then press 
on the remote control of this unit.
4 This unit automatically pauses at the end of the side A. Turn the tape over to the side B, resume
recording on the tape deck, and then press 
or
on the remote control of this unit to start playback.
4
Notes
●Because programmed data changes every time RANDOM is pressed, the unrecorded space at the end of each side of the tape also varies accordingly.
●All tracks may not be programmed if the tape length is not enough. To program all tracks, use a tape that is longer than the actual playing time.
●In step 2, you can check the program data for side A and side B. Information for each side is displayed for 3 seconds.
1 2 3
PROG. RANDOM
1 Shows the number of programmed tracks.
2 Shows the total time of programmed tracks.
3 Shows the side of the tape.
●Up to 40 tracks can be programmed. A pause inserted between side A and B is counted as one track.
●CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 3 and 4, press
SYNCHRO and then press 
on the remote control of this unit. Recording automatically starts. (For details, refer to page
21.)
