Installing a 3C359 NIC Driver for Windows Environments

4-7

This path identifies the location of the NDIS 4 driver files for Windows NT 4.0. The Select OEM Option dialog box appears.

8Select 3Com TokenLink Velocity XL PCI Adapter and click OK.

9Verify that 3Com TokenLink Velocity XL PCI Adapter appears in the list in the Network Adapters tab and click Close.

If your network environment uses the TCP/IP communications protocol, the Microsoft TCP/IP Properties dialog box is displayed. You must obtain from your network administrator all the information you need to define an IP address during the installation process. Continue after you have defined the NIC for TCP/IP.

Bindings messages appear, followed by a prompt to restart the computer.

10Remove the TokenDisk diskette or CD from the drive.

11Click Yes to restart the computer.

This concludes the procedure for installing the NDIS 4 driver for Windows NT 4.0.

To disable auto ring speed detection and manually select the ring speed, see “Setting Ring Speed for Windows NT 4.0” for more details.

To define a locally administered network address, see “Defining the LAA Address for Windows NT” for more details.

To select applications for high-priority network access, see “Configuring Class of Service” for more details.

Installing a Driver for Windows NT 3.51

Follow these steps to install the NDIS 3 driver for

Windows NT 3.51.

1If you are using the 3.5-inch diskettes, insert TokenDisk diskette #2 in the drive. If you are using the TokenDisk CD, insert it in the CD-ROM drive.

2In the Main group, double-click the Control Panel icon.

Page 59
Image 59
3Com TokenLink VelocityTM XL PCI Network Interface Card manual Installing a Driver for Windows NT