3Com TokenLink VelocityTM XL PCI Network Interface Card manual

4-24CHAPTER 4: MICROSOFT WINDOWS ENVIRONMENT

Figure 4-13Class of Service Additional Ranges Window

2Enter the beginning of the port or socket range for the application in the Range Start box.

The range start should be a hexadecimal value with a maximum of four digits.

3Enter the inclusive range end value of the port or socket range for the application.

The range end should be a hexadecimal number with a maximum of four digits. If only one port or socket is needed, Range End should match Range Start.

4Select the protocol that the application uses. The protocol can be TCP, UDP, or IPX.

Some applications support multiple protocols and have port or socket ranges for each protocol. In this case, the range or protocol must match the protocol on the PC. For example, if only TCP/IP is installed, do not enter the socket range for IPX, because doing so will adversely affect driver performance.