3Com TokenLink VelocityTM XL PCI Network Interface Card Network Setup message window, click OK

Configuring IBM Host Connectivity 5-7

10In the Network Setup message window, click OK.

The Windows Setup window displays the following message:

You need to quit Windows and restart your computer so that changes you made will take effect. Do not press CTRL+ALT+DEL to restart your computer--this may cause you to lose work. Restart the computer now?

11In the Windows Setup message window, click Restart Computer.

This completes the procedure for adding the Microsoft MS-DLC network protocol to the Windows for Workgroups Add Network Protocol list for the 3C359 NIC.

After adding the network protocol, install the host connectivity applications (such as client access and emulator applications) that are appropriate for your environment.

Adding the 32-Bit DLC Network Protocol for Windows 95

Follow the steps in this section to add the Microsoft 32-bit DLC network protocol to the Windows 95 Network Protocols list for the 3C359 NIC. The 32-bit DLC protocol is required for connectivity between your PC and an IBM host computer.

Before proceeding, make sure that you have the Microsoft 32-bit DLC network protocol available. If you are using Windows 95 version 950 or 950a (the “retail” version), you must download the 32-bit DLC protocol from the Microsoft Web site to a temporary storage location on your PC’s hard disk or on a diskette. Windows 95 version 950b, OSR2, includes the 32-bit DLC protocol.

1On the Windows 95 desktop, double-click the My Computer icon.

2Double-click the Control Panel icon.

3Double-click the Network icon.

4In the Network window, select 3Com TokenLink Velocity XL PCI Adapter in the Configuration tab. Click Add.