4-6CHAPTER 4: MICROSOFT WINDOWS ENVIRONMENT

Messages appear while files are being copied. The System Settings Change dialog box appears.

7Remove the TokenDisk diskette or CD from the drive.

8Click Yes to restart the computer.

This concludes the procedure for installing a driver for Windows 95 version 950b, OSR2.

To disable auto ring speed detection and manually select the ring speed, see “Setting Ring Speed for Windows 95” for more details.

To define a locally administered network address, see “Defining the LAA Address for Windows 95” for more details.

Installing a Driver for Windows NT 4.0

Follow these steps to install the 3Com NDIS 4 driver for Windows NT 4.0.

If your network environment uses the TCP/IP communications protocol, obtain from your network administrator all the information you need to define an IP address during the installation process before starting.

1In the My Computer group, double-click the Control Panel icon.

2In the Control Panel group, double-click the Network icon.

3In the Network dialog box, click the Adapters tab.

4In the Adapters tab, click Add.

5In the Select Network Adapter dialog box, click Have Disk.

The Insert Disk dialog box appears.

6If you are using the 3.5-inch diskettes, insert TokenDisk diskette #2 in the drive. If you are using the TokenDisk CD, insert it in the CD-ROM drive.

7Accept the displayed default path by clicking OK.

For example, if you are using the 3.5-inch diskettes, the following path is displayed:

a:

Page 57 Page 59
Page 58
Image 58
3Com TokenLink VelocityTM XL PCI Network Interface Card manual Installing a Driver for Windows NT
Page 57 Page 59
Top Page Image Contents