Installing the Modem
1. Connect the modem cable to the modem.
2. Slip the left end of the modem and the modem cable underneath the metal modem-securing clip.
NOTICE: Ensure that the modem cable is routed correctly when you replace the modem.
3. Ensure that the modem cable is properly routed under its routing clip.
NOTICE: Do not press down on the left side of the modem while installing it.
4. Align the connector on the bottom of the modem with the modem connector on the system board and then press down
on the right side of the modem to seat both connectors.
1 modem Y0231
2modem-cable routing clip
3modem cable
4modem-securing clip
5. Replace the M2 x 3-mm screw.
6. Reconnect the display cable to the display cable connector and then secure the display cable in its three display- cable
routing clips.
Back to Contents Page