Display Latch
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
1. Remove the keyboard.
2. Remove the display assembly.
3. Remove the display bezel.
4. Remove the M2 x 5-mm screw that secures the display bracket to the top cover.
5. Lift the display bracket out of the top cover, and then remove the display latch.
NOTE: Ensure that the display bracket is upright when you replace the display latch.
1top cover H1375
2M2 x 5-mm screw (1) 1428U
3display bracket
4display latch F1484
Back to Contents Page