Back to Contents Page
FanDell™ Latitude™ D505 Service Manual
CAUTION: Before performing the following procedures, read the safety instructions in your Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the palm rest.
4. Remove the microprocessor thermal-cooling assembly.
5. Pull straight up on the fan cable connector to disconnect it from the system board connector.
1M2.5 x 8-mm screws (2) 3R690
2 fan J1043
3fan cable connector
4system board connector