1 pull-tab on bottom flex-cable connector

2 top flex-cable connector

3 display connector 4 inverter connector

15-Inch Display Panel

CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Remove the keyboard.

3.Remove the display bezel.

4.Remove the eight M2 x 5-mm screws from each side of the display panel.

5.Lift the display panel, and rotate the display panel out of the display cover.

6.Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.

7.Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.

1 pull-tab on bottom flex-cable connector

2 top flex-cable connector

3 display connector 4 inverter connector

Page 37
Image 37
Dell D505 service manual Inch Display Panel