Star Trac E-UB manual Install the Seat Post

3. Install the Seat Post

Carefully slide the seat post into the seat tube.

Pull out on the seat release knob, and slide the seat post fully into the seat tube. Release the seat release knob.

Install two M4 X 20 socket head screws into the seat sleeve to secure it. Tighten the screws securely using the 3mm hex wrench.

	SEAT
	POST
SEAT	SEAT
RELEASE
	TUBE
KNOB

Step 3

4. Install the Pedals

Install the pedals on the pedal cranks using a multi-end wrench or a 5/8- inch open-end wrench. Tighten the pedals securely.

NOTE: Turn the left pedal spindle counterclockwise when threading into the crank arm; turn the right pedal spindle clockwise when threading into the crank arm.

Step 4

5.Install the Display Console

a) Remove (2) Pillips Head Screws from the back of the display. Retain for later use. Separate the front from the back display. Place the front display aside on a safe none scratch surface.

Step 5a

b) Insert the cables through the neck.

NOTE: It may be necessary to have one person support and position the display console while a second person feeds the cables through the neck.

Step 5b

12 STAR TRAC E SERIES BIKES OWNER’S GUIDE