Star Trac E-UB manual Install the Seat Frame

3. Install the Seat Frame

Carefully position the seat frame over the seat carriage on the bike frame, aligning the attachment holes in the sides of the seat frame with the holes in the seat carriage.

Using the 6mm hex wrench and four M10 X 10 socket head screws, secure the seat frame to the seat carriage. Tighten all four screws securely.

4. Install the Pedals

Install the pedals on the pedal cranks using a multi-end wrench or a 5/8-inch open-end wrench. Tighten the pedals securely.

NOTE: Turn the left pedal spindle counterclockwise when threading into the crank arm; turn the right pedal spindle clockwise when threading into the crank arm.

5.Install the Display Console

a) Remove (2) Pillips Head Screws from the back of the display. Retain for later use. Separate the front from the back display. Place the front display aside on a safe none scratch surface

Step 5a

b) Insert the cables through the neck.

NOTE: It may be necessary to have one person support and posi- tion the display console while a second person feeds the cables through the neck.

Step 5b

16 STAR TRAC E SERIES BIKES OWNER’S GUIDE