Star Trac E-UB manual Adjusting the Armrests

Heart

Rate Cables

h)Take the Adjustable Heart Rate Bar and attatch the cable from the hole in the neck to the cable at the end of the Heart Rate mount. Use (4) M6 x 25mm Button Head Screws and (4) M6 Washers to

mount the Heart Rate bar to the Display neck.

M6 x 25mm

M6 Washers

Step 5h

6. Leveling the Bike

Place the bike on the floor in the position in which it will be used. Use the leveling adjusters (located on the underside of the front and rear feet) to compensate for uneven floor surfaces and to eliminate wob- bling.

7. Adjusting the Armrests

If needed, the arm rest angle may be adjusted by turning a screw under the arm rest. Using the 3mm hex wrench, turn the screw clock-

wise to lower or counterclockwise to raise the arm rest angle. Both

arm rests should be adjusted to the same angle, slightly above level.Adjustment

Screw

You have now completed assembly of your STAR TRAC E-RB RECUMBENT BIKE.

18 STAR TRAC E SERIES BIKES OWNER’S GUIDE