Chapter 2 Installing the SN 5428-2 Storage Router

Installing the SN 5428-2 Chassis

Verify the site power for the type of device you are installing. Power requirements are useful for planning the power distribution system needed to support the storage router. Heat dissipation is an important consideration for sizing the air-conditioning requirements for an installation. See Table A-1 on page A-1for power and heat ratings for the storage router.

Caution To prevent a loss of input power, verify that the total maximum load on the circuit supplying power to the power supply is within the current ratings of the wiring and breakers.

Installing the SN 5428-2 Chassis

You can install the SN 5428-2 chassis on a table or a shelf, or in an equipment rack. The following sections describe the steps required to install the SN 5428-2 chassis:

•Installing on a Table or a Shelf, page 2-6

•Rack-Mounting the SN 5428-2 Storage Router, page 2-7

•Attaching the Optional Cable Guide, page 2-14

Before installing the storage router, read the Site Preparation and Safety Guide to familiarize yourself with proper site and environmental conditions.

Installing on a Table or a Shelf

To install the chassis on a table or a shelf, follow these steps:

Step 1 Locate the four adhesive-backed rubber feet. They are in the accessory kit that is shipped with the storage router.

Step 2 Peel the rubber feet from their backing and place the feet, adhesive-side down, onto the four round recessed areas on the bottom of the chassis.

Step 3 Place the storage router on a table or a shelf near an AC power source.

 

Cisco SN 5428-2 Storage Router Hardware Installation Guide

2-6

OL-4797-01

Page 31 Page 33
Page 32
Image 32
Cisco Systems manual Installing the SN 5428-2 Chassis, Installing on a Table or a Shelf
Page 31 Page 33

SN 5428-2 specifications

Cisco Systems SN 5428-2 is a highly versatile and advanced network storage solution designed to meet the demands of data center environments. This robust storage appliance integrates cutting-edge technologies to provide high performance, reliability, and scalability, making it an ideal choice for organizations looking to enhance their data management capabilities.

One of the main features of the SN 5428-2 is its high-density architecture, which allows for efficient utilization of space while providing ample storage capacity. The system supports multiple drive configurations, including HDDs and SSDs, enabling users to tailor their storage solutions based on performance needs and budget constraints. With a significant amount of raw capacity available, organizations can effortlessly handle large volumes of data and support intensive workloads.

The SN 5428-2 boasts advanced data protection technologies, ensuring that critical information is safeguarded against loss or corruption. Features like RAID support provide redundancy and fault tolerance, while snapshot and cloning capabilities offer quick recovery options in case of data breaches or system failures. Additionally, built-in encryption features help protect sensitive data both at rest and in transit.

The appliance incorporates state-of-the-art networking capabilities as well. With support for various network protocols, including iSCSI and Fibre Channel, the SN 5428-2 can seamlessly integrate into existing infrastructures. This adaptability allows for easy connection with different servers and storage systems, facilitating a more cohesive and efficient operational environment.

Furthermore, the SN 5428-2 is designed with scalability in mind. Organizations can start with a basic configuration and expand as their storage needs grow by adding additional drives or connecting more appliances. This flexibility ensures that businesses can continue to meet their evolving data demands without the need for complete system overhauls.

Management and monitoring of the SN 5428-2 are simplified through a user-friendly interface that provides real-time insights into system performance, capacity utilization, and health status. Administrators can easily configure and manage storage resources, making operational tasks more efficient.

In summary, Cisco Systems SN 5428-2 stands out in the realm of storage solutions by combining high density, robust data protection, advanced networking capabilities, and remarkable scalability. Its thoughtful design and features make it an essential tool for organizations looking to enhance their data storage infrastructure and improve overall performance. With its reliable and efficient performance, the SN 5428-2 is well-suited for a wide array of data center applications.
Top Page Image Contents