Chapter 1 Product Overview

Front-Panel LEDs

Fibre Channel Ports

The Fibre Channel ports are labeled FC 1 through FC 8. (See Figure 1-2.) Each port provides a 1-Gigabit/2-Gigabit autosensing Fibre Channel interface for connecting to storage systems, Fibre Channel switches, Fibre Channel hosts, or other Cisco storage networking products.

Each Fibre Channel port can be configured as one of the following port types: E_Port, F_Port, FL_Port, G_Port, GL_Port, TL_Port, or donor port.

Note Note that the sole purpose of a donor port is to extend buffer credits to other ports; a donor port cannot provide connectivity to any FC device.

Each port uses a small form-factor pluggable (SFP) module for connection to the port’s physical medium. See Appendix B, “Cable and Port Pinouts” for SFP module specifications. Each Fibre Channel port has LEDs indicating its status, as described in the “Front-Panel LEDs” section.

The storage router contains two internal Fibre Channel interfaces to allow access between the GE ports and the Fibre Channel ports, FC 1 through FC 8. These two internal Fibre Channel interfaces are named fci1 and fci2. As Fibre Channel initiators, these interfaces are assigned World Wide Port Numbers (WWPN); therefore, fci1 is also referred to as initiator WWPN1 and fci2 is also referred to as initiator WWPN2. There are no hardware installation tasks for these interfaces; however, it is important to be aware of this internal architecture and the WWPNs for some software configuration tasks that require these port WWPNs (such as zoning).

Front-Panel LEDs

The front-panel LEDs provide status indications about the SN 5428- chassis and its ports. (See Figure 1-3.)

Each Gigabit Ethernet port, GE 1 and GE 2, has three LEDs, labeled LINK, TX, and RX. The LEDs are located to the left of each Gigabit Ethernet port.

The FAULT, STATUS, and POWER LEDs indicate the overall status of the

SN 5428 Storage Router. The LEDs are located to the left of the CONSOLE port.

 

 

Cisco SN 5428-2 Storage Router Hardware Installation Guide

 

 

 

 

 

 

OL-4797-01

 

 

1-5

 

 

 

Page 20 Page 22
Page 21
Image 21
Cisco Systems SN 5428-2 manual Front-Panel LEDs, Fibre Channel Ports
Page 20 Page 22

SN 5428-2 specifications

Cisco Systems SN 5428-2 is a highly versatile and advanced network storage solution designed to meet the demands of data center environments. This robust storage appliance integrates cutting-edge technologies to provide high performance, reliability, and scalability, making it an ideal choice for organizations looking to enhance their data management capabilities.

One of the main features of the SN 5428-2 is its high-density architecture, which allows for efficient utilization of space while providing ample storage capacity. The system supports multiple drive configurations, including HDDs and SSDs, enabling users to tailor their storage solutions based on performance needs and budget constraints. With a significant amount of raw capacity available, organizations can effortlessly handle large volumes of data and support intensive workloads.

The SN 5428-2 boasts advanced data protection technologies, ensuring that critical information is safeguarded against loss or corruption. Features like RAID support provide redundancy and fault tolerance, while snapshot and cloning capabilities offer quick recovery options in case of data breaches or system failures. Additionally, built-in encryption features help protect sensitive data both at rest and in transit.

The appliance incorporates state-of-the-art networking capabilities as well. With support for various network protocols, including iSCSI and Fibre Channel, the SN 5428-2 can seamlessly integrate into existing infrastructures. This adaptability allows for easy connection with different servers and storage systems, facilitating a more cohesive and efficient operational environment.

Furthermore, the SN 5428-2 is designed with scalability in mind. Organizations can start with a basic configuration and expand as their storage needs grow by adding additional drives or connecting more appliances. This flexibility ensures that businesses can continue to meet their evolving data demands without the need for complete system overhauls.

Management and monitoring of the SN 5428-2 are simplified through a user-friendly interface that provides real-time insights into system performance, capacity utilization, and health status. Administrators can easily configure and manage storage resources, making operational tasks more efficient.

In summary, Cisco Systems SN 5428-2 stands out in the realm of storage solutions by combining high density, robust data protection, advanced networking capabilities, and remarkable scalability. Its thoughtful design and features make it an essential tool for organizations looking to enhance their data storage infrastructure and improve overall performance. With its reliable and efficient performance, the SN 5428-2 is well-suited for a wide array of data center applications.
Top Page Image Contents