Chapter 2 Installing the SN 5428-2 Storage Router

Read Safety Notices

when the power cord is connected. To see translated versions of the warning, refer to the Regulatory Compliance and Safety document that accompanied the device.

Warning The plug-socket combination must be accessible at all times because it serves as the main disconnecting device. To see translated versions of the warning, refer to the Regulatory Compliance and Safety document that accompanied the device.

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). To see translated versions of the warning, refer to the Regulatory Compliance and Safety document that accompanied the device.

Warning When installing the unit, the ground connection must always be made first and disconnected last. To see translated versions of the warning, refer to the Regulatory Compliance and Safety document that accompanied the device.

Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. To see translated versions of the warning, refer to the Regulatory Compliance and Safety document that accompanied the device.

Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. To see translated versions of the warning, refer to the Regulatory Compliance and Safety document that accompanied the device.

 

 

Cisco SN 5428-2 Storage Router Hardware Installation Guide

 

 

 

 

 

 

OL-4797-01

 

 

2-3

 

 

 

Page 28 Page 30
Page 29
Image 29
Cisco Systems manual Installing the SN 5428-2 Storage Router Read Safety Notices
Page 28 Page 30

SN 5428-2 specifications

Cisco Systems SN 5428-2 is a highly versatile and advanced network storage solution designed to meet the demands of data center environments. This robust storage appliance integrates cutting-edge technologies to provide high performance, reliability, and scalability, making it an ideal choice for organizations looking to enhance their data management capabilities.

One of the main features of the SN 5428-2 is its high-density architecture, which allows for efficient utilization of space while providing ample storage capacity. The system supports multiple drive configurations, including HDDs and SSDs, enabling users to tailor their storage solutions based on performance needs and budget constraints. With a significant amount of raw capacity available, organizations can effortlessly handle large volumes of data and support intensive workloads.

The SN 5428-2 boasts advanced data protection technologies, ensuring that critical information is safeguarded against loss or corruption. Features like RAID support provide redundancy and fault tolerance, while snapshot and cloning capabilities offer quick recovery options in case of data breaches or system failures. Additionally, built-in encryption features help protect sensitive data both at rest and in transit.

The appliance incorporates state-of-the-art networking capabilities as well. With support for various network protocols, including iSCSI and Fibre Channel, the SN 5428-2 can seamlessly integrate into existing infrastructures. This adaptability allows for easy connection with different servers and storage systems, facilitating a more cohesive and efficient operational environment.

Furthermore, the SN 5428-2 is designed with scalability in mind. Organizations can start with a basic configuration and expand as their storage needs grow by adding additional drives or connecting more appliances. This flexibility ensures that businesses can continue to meet their evolving data demands without the need for complete system overhauls.

Management and monitoring of the SN 5428-2 are simplified through a user-friendly interface that provides real-time insights into system performance, capacity utilization, and health status. Administrators can easily configure and manage storage resources, making operational tasks more efficient.

In summary, Cisco Systems SN 5428-2 stands out in the realm of storage solutions by combining high density, robust data protection, advanced networking capabilities, and remarkable scalability. Its thoughtful design and features make it an essential tool for organizations looking to enhance their data storage infrastructure and improve overall performance. With its reliable and efficient performance, the SN 5428-2 is well-suited for a wide array of data center applications.
Top Page Image Contents