Chapter2 Installing the SN 5428-2 Storage Router
Connecting Power
2-28
Cisco SN 5428-2 Storage Router Hardware Installation Guide
OL-4797-01
Figure2-22 Connecting the Console Cable
Connecting Power The SN 5428-2 Storage Router power supply automatically senses t he voltage
source and will adjust to an input voltage range between 90 VAC - 264 VAC 50/60
Hz.
To connect power to the storage router, follow these steps:
Step1 Ensure that all site power and grounding requirements described in the Site
Preparation and Safety Guide have been met before connecting the chassis to a
power source.
Step2 Make sure the power switch is set to off. (See Figure2-23.)
85670
Rollover cable
RJ-45/DB-9
adapter
To PC
serial port