2-7
Cisco SN 5428-2 Storage Router Hardware Installation Guide
OL-4797-01
Chapter2 Installing the SN 5428-2 Stora ge Router
Installing the SN5428-2 Chassis
Rack-Mounting the SN 5428-2 Storage Router
You can rack-mount the SN5428-2 Stora ge Router chassis in a 19-inch
equipment rack with the front panel forward.
You need the following tools to install the storage router in a rack:
•#2 Phillips screwdriver
•Tape measure
To install the storage router in a rack, follow these steps:
Step 1 Locate the following rack-mount components in the accessory kit shipped with
your storage router:
•Two mounting brackets labeled RIGHT and LEFT. (See Figure1.)
•Two sets of rack rails. Each set consists of a rail labeled FRONT and a rail
labeled REAR. (See Figure2.)
•Two cable guides (with black mounting screws).
•Assorted screws and fasteners (use as needed).
Figure1 Mounting Brackets
85500
Left
Right