AT&T EP5632 user manual Battery installation & charging, Step

Getting started

Battery installation & charging

Install the battery as shown below. After installing the battery, you can make and receive short calls, but replace the handset in the telephone base or additional charger when not in use. For optimal performance, charge the handset battery for at least 16 hours before use. When fully charged, the handset battery provides approximately five hours of talk time and three days of standby time.

	BATTERYPACK 80-5808-00-00
Step 1	Step 2
Press the tab and	Insert the supplied battery as
slide the battery	indicated. Insert the top edge
compartment	(contacts and tab) in first,
cover downwards.	then push downwards on the
	lower portion of the battery.

Step 3

Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.

Step 4

Charge the handset face up in telephone base, or place the handset in the additional charger (EP5632-2 only). The CHARGE light will be on when charging.

IMPORTANT INFORMATION

1.Use only the battery supplied with this product. To order a replacement or spare battery (AT&T model 103, part number 89-0429-00-00) or

equivalent, visit our website at	www.telephones.att.com, or call
1 (800) 222-3111. In Canada dial 1	(866) 288-4268.

2. See the Troubleshooting section on page 92 for charging issues.

14