Getting started
Belt clip & optional headset
Install belt clip as shown below, if desired.
Snap the belt | To release the belt clip from |
clip into the | the handset, press on both |
notches on | flaps of the belt clip (as |
both sides of | shown). |
the handset. | Pull and unlock one flap |
| from the notch first before |
| detaching the whole belt |
| clip from handset. |
For handsfree headset conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a headset, visit our website at www.telephones.att.com or call 1 (800)
Lift the rubber flap here.
Plug a 2.5 mm headset into the jack on the side of the handset.
Side of the handset
15
