Bluetooth
NOTE: Connected devices appear on the Active Devices list automatically.
12:00
AM
REDIAL
MENU 
CID
Main Menu
Call Log
Answering System
Bluetooth
Select
Bluetooth
Set up Cellular
Set up Headset
Active Devices
| Select |
Active Devices | |
X 1 | My Headset |
2 | John's Cell |
Connect INFO OPTIONS | |
Active Devices
Only devices on the Active Devices list can establish a Bluetooth connection with the telephone base. Although two paired devices can be connected to the telephone base, only one Bluetooth cellular phone or headset can be on a call at a time.
To enter the Active Devices list:
1.Press the MENU softkey on the telephone base while in idle mode.
2.Press the UP and DOWN NavKeys to highlight Bluetooth, then press the SELECT softkey to enter the Bluetooth menu.
3.Press the DOWN NavKey to highlight Active Devices, then press the SELECT softkey.
In the Active Devices list, you may see the following status symbols:
•X in front of the device it means that it is disconnected.
•Pin front of a device it indicates that it is connected to the telephone base.
•))) in front of a device indicates that the telephone base is trying to connect to that device.
While in the Active Devices list, you can select:
•CONNECT - press the CONNECT softkey to connect to a disconnected device.
•DISCONN - press the DISCONN softkey to disconnect a device.
•INFO - press the INFO softkey to view the current status and full bluetooth device name of a device.
•OPTIONS - press the OPTIONS softkey to replace or remove a device.
If you experience difficulty using your Bluetooth device(s), make sure that the device is on and not connected to any other Bluetooth device. See the Troubleshooting section for more information (page 92).
27
