System setup
NOTE: Even if the ringer volume is off, the telephone base or handset will ring at the lowest volume setting during an incoming intercom call.
Main Menu
Bluetooth
Settings
Ringers
Select
Ringers
Ringer for HOME
Ringer for CELL1
Ringer for CELL2
Select
Ringer for HOME
Ringer Volume
Ringer Melody
Select
Ringer Volume
SET 
OFF
Ringer Volume
Ringer Off
SET 
OFF
Ringer Volume
You can choose from six ringer volume levels on the telephone base. The ringer can also be turned off so the telephone base will not ring during incoming calls.
To adjust the telephone base ringer volume:
1.Press the MENU softkey in idle mode to enter the main menu.
2.Press the UP and DOWN NavKeys to select Ringers, then press SELECT softkey to enter the Ringers menu.
3.Press the UP and DOWN NavKeys to highlight:
•Ringer for HOME - set the ringer volume and melody for the HOME line.
•Ringer for CELL 1 - set the ringer volume and melody for the first connected cellular phone in the Active Devices list (page 27).
•Ringer for CELL 2 - set the ringer volume and melody for the second connected cellular phone in the Active Devices list (page 27).
4.Press the SELECT softkey.
5.Press the SELECT softkey again to select Ringer Volume.
6.To increase or decrease the ringer volume:
•Press the UP and DOWN or LEFT and RIGHT NavKeys.
•Press the UP and DOWN volume controls on the telephone base.
To turn off the telephone base ringer:
•Press the DOWN or LEFT NavKeys or the DOWN volume control until the display shows Ringer Off. You can also press the OFF softkey.
7.Press the SET softkey to save the setting.
47
