AT&T EP5632 user manual Set Time, Edit Handset Name

System setup

Settings

Set Time

Edit Handset Name

Show Handset Name

Keypad Tone

Language

Set Time

12:00 AM

SET

Edit Handset Name

HANDSET 2

SAVEERASE

NOTE: If no characters are entered for the handset name, Name must not be empty will be shown on the display. Enter a name for the handset.

Set Time

If you subscribe to caller ID service provided by your local telephone company, the time will automatically be set with an incoming HOME call.

To manually set the time:

1.Press MENU/SELECT in idle mode to enter the main menu.

2.Press the UP or DOWN Navkeys to select Settings, then press MENU/SELECT to enter the Settings menu.

3.Press MENU/SELECT to select Set Time.

4.Use the dial pad (0-9) to enter the hour (01-12) and minutes (00-59). Use the dial pad to enter 2 for AM and 7 for PM. You can also use the UP and DOWN Navkeys to set the hour, m i n u t e s , and AM/PM.

5.Press the SET softkey or MENU/SELECT to save the setting.

NOTES:

1.If Invalid Time appears on the display, make sure you are entering 01-12 for the hour and 00-59 for the minutes.

2.If you do not subscribe to caller ID service, you will need to set the time on each handset.

Edit Handset Name

The handset name can be up to 15 characters including spaces.

To edit the handset name:

1.Follow steps 1 and 2 in the above section.

2.Press the DOWN Navkey to highlight Edit Handset Name, then press MENU/SELECT.

•Press the LEFT and RIGHT NavKey to move the cursor left and right.

•Press the ERASE softkey to delete highlighted characters.

•Use the dial pad to enter up to 15 alphanumeric characters (see page 68).

3.Press the SAVE softkey or MENU/SELECT to save the setting.

31