System setup

Answering System

Call Screening

Remote Code

Msg Alert Tone

Select

Msg Alert Tone On

Off

Set

Msg Alert Tone

By default, Msg Alert Tone is off. When the message alert tone and the answering system is on, telephone base will beep every 10 seconds when you have a new message on the answering system.

To change this setting:

1.Press the MENU softkey on the telephone base to enter the main menu.

2.Press the UP and DOWN NavKeys to highlight Answering System, then press the SELECT softkey to enter the Answering System menu.

3.Press the UP and DOWN NavKeys to highlight Msg Alert Tone, then press the SELECT softkey.

4.Press the UP and DOWN NavKeys to highlight On or Off, then press the SET softkey to save the setting.

NOTE: If the message alert tone is on, but the answering system is off, the telephone base will not beep when there are new messages.

54

Page 58
Image 58
AT&T EP5632 user manual Msg Alert Tone