AT&T EP5632 user manual Spare battery optional

Getting started

Spare battery (optional)

You can keep a charged spare battery (AT&T model 103, part number 89-0429-00-00, purchased separately) in the telephone base. The spare battery compartment is located on the side of the telephone base. The spare charged battery allows you to quickly replace a low handset battery, or in the event of a power failure, make and receive short calls for up to three hours, depending on the amount of use.

To install and charge a spare battery:

1. Locate the spare battery compartment latch on the side of the telephone base, then slide the latch to the right.

Compartment latch

2.Once the battery compartment pops out, place the

spare battery inside the compartment according to the diagram inside the compartment.

RECHARGEABLE

Ni-MH 3.6V 600mAh

WARNING:

DO NOT BURN OR

PUNCTURE BATTERIES

MADE IN CHINA

CAUTION: To Reduce Risk of Fire, Use Only Supplied Battery or Battery 103

Use only supplied rechargeable battery or replacement battery (AT&T model 103, part number 89-0429-00-00, purchased separately).

3.Push the compartment with battery in it back into the telephone base, until it clicks into place.

RECHARGEABLE

CAUTION:

Ni-MHBATTERY3.6V 600mAhPACK

Reduce Risk

WARNING:80-5808-00To-00

DO NOT BURNofORFire, Use Only

PUNCTURE BATTERIES

Supplied Battery

or Battery 103

MADE IN CHINA

When you have finished installing the spare battery, the battery charging icon will appear in the top right corner of the telephone base display. It takes at least 24 hours for the spare battery to reach a full charge. Once the spare battery is fully charged, you can keep it charged until needed.

18