OWNER'S MANUAL
MACHINE ADJUSTMENT
STEP 1:
13
53
NOTE:
-SOME PARTS MAY HAVE BEEN REMOVED FOR CLARITY.
MAJOR ADJUSTMENT:
STEP 1:
BE SURE THE BOTTOM DUAL HOLE BUMPER (53) OF THE LIFT ARM ASSEMBLY REMAINS IN CONTACT WITH THE BASE FRAME ASSEMBLY (13), AS SHOWN.
STEP 2:
ADJUST HEIGHT OF THE LIMITING STOP ASSEMBLY
(9)SO THAT IT IS IN CONTACT WITH THE DUAL HOLE BUMPER (53), AS SHOWN. ONCE THE LIMITING STOP IS PROPERLY ADJUSTED, WRENCH TIGHTEN JAM NUT (27).
STEP 2:
53
9
27
PAGE 27 |
