Programming
Step 2. Set Watering Days
This unit has interval watering or individual day selection from everyday to every 15th day or a 365 day calendar with odd/even day selection in areas where water restrictions require this feature.
Turn the dial to Set Watering Days.
Interval Day Selection
The display will show: “Interval 1” will be flashing.
This means that watering will occur every day.
To change the interval day, press the 
button.
Examples: Interval 2 means watering will take place every second day, 3 means watering will take place every third day etc.
Interval watering can be set from everyday to every 15th day. The Run Day refers to the number of days before the next watering program will occur.
Individual Day Selection
Press the next button This is the selectable day option.
The display will show:
This refers to Mon being Day 1. To turn Monday off, press 
button. To leave Monday active, leave as is and advance to Tuesday (day 2) by pressing the next button. Again press the 
button to set the day off if required followed by next to advance. Continue until all seven
days have been set “on” | or “off” | . |
PAGE 8 |
|
|
Programming
Odd / Even Day Selection (Optional)
In some regions, users are only allowed to water their gardens on, ODD dates if their house number is ODD, or on EVEN dates when their number is EVEN .
This controller allows this to be done simply by setting the relevant selection of ODD or EVEN and setting the current date into the controller. The controller will account for leap years.
If you require the ODD / EVEN day option, simply press the next button until “ODD” is shown. Press the next button and “EVEN” will be shown. This feature may be required in areas where water restrictions are enforced.
Note: Remember to set the 365 day calendar when setting the clock, or this feature will be out of sequence.
Step 3. Set Station Run Times
This is the length of time that each station (valve) is set to water on a particular program. Maximum watering time is 12 hours 59 minutes for each station. A station can be assigned to 1 or 2 programs if required.
Turn the dial to the Set Station Run Times position and the display will show the following:
This means station 1 has a default run time of 10 minutes in program 1. “Station 1” will be flashing.
PAGE 9
