PROGRAMMING
Your thermostat may be programmed to adjust the heating and cooling settings up to 4 times per day (MORN, DAY, EVE, NITE). You can setup a temperature time schedule for weekdays, Saturday, and Sunday.
To enter programming mode, press the Prog key 4 times.
When in programming mode:
1.The item that is being programmed will flash.
2.The up arrow key (∧) is used to increase the value.
3.The down arrow key (∨) is used to decrease the value.
4.The Prog (>) key is used to advance to the next item.
5.The Hold (<) key is used to return to the previous item.
6.To exit programming mode, press the Mode key.
The thermostat will automatically exit programming mode after 20 seconds of no key activity.
SETTING THE VARIATION FOR HIGHER RATES
To view or change the variation for MID, HI and CRIT rates, press the Prog key four times. The display will show RATE MID. The variation, in degrees, for the MID rate will flash:
VAR
RATE
12
