CONNECTING TO OMNILT
Connect the "Yellow" and "Green" wires from the touchscreen to the "YEL" and "GRN" terminals under the section marked "CONSOLE" on the controller, respectively. Connect the "Red" and "Black" wires from the touchscreen to the "12V" and "GND" terminals under the section marked "AUX" on the controller, respectively.
A maximum combination of 4 touchscreens and consoles can be used with OmniLT.
NOTE: Do not exceed the maximum current limitation of the controller. If more than 1 touchscreen is used, the additional touchscreens must be powered from an external power supply or HAI Touchscreen Hub.
THE EXTERNAL POWER SUPPLY MUST BE GROUNDED TO THE CONTROLLER EARTH GROUND TO AVOID DAMAGE TO THE TOUCHSCREEN.
RED | BLACK | YELLOW | GREEN |
BLACK |
|
|
|
RED |
|
|
|
GREEN
YELLOW
CONNECT ENDS OF SUPPLIED CABLE TO CORRESPONDING ENDS OF THE POWER/COMMUNICATION CABLE FROM THE CONTROLLER
SUPPLIED CABLE 
(PLUGS INTO J1)
OmniLT Connections
9
