CONNECTING TO OMNI IIe, LUMINA, OMNIPRO II, AND LUMINA PRO
Connect the "Yellow" and "Green" wires from the touchscreen to the "A" and "B" terminals under the section marked "CONSOLE" on the controller, respectively. Connect the "Red" and "Black" wires from the touchscreen to the "12V" and "GND" terminals under the section marked "AUXILIARY" on the controller, respectively.
A maximum combination of 8 touchscreens and consoles can be used with Omni IIe or Lumina and a maximum combination of 16 with OmniPro II or Lumina Pro.
NOTE: Do not exceed the maximum current limitation of the controller. If more than 2 touchscreens are used, the additional touchscreens must be powered from an external power supply or HAI Touchscreen Hub.
THE EXTERNAL POWER SUPPLY MUST BE GROUNDED TO THE CONTROLLER EARTH GROUND TO AVOID DAMAGE TO THE TOUCHSCREEN.
RED | BLACK | YELLOW | GREEN |
BLACK
RED |
GREEN |
YELLOW
CONNECT ENDS OF SUPPLIED
CABLE TO CORRESPONDING ENDS
OF THE POWER/COMMUNICATION
CABLE FROM THE CONTROLLER
SUPPLIED CABLE 
(PLUGS INTO J1)
Omni IIe, Lumina, OmniPro II, and Lumina Pro Connections
8
