PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
Power Light is off | • Unit is not plugged in | • Plug unit in |
|
| • Press the POWER button |
|
| to turn the power on |
| • No power at unit | • Check circuits, fuses, try a |
|
| different outlet |
|
|
|
SoundSpa will not | • Unit is not plugged in | • Plug unit in |
turn on | • Volume is down too low | • Turn the SOUNDSPA |
|
| POWER/VOLUME knob |
|
| clockwise to increase |
|
| volume |
| • No sound selection has | • Press a sound selection |
| been made | button to choose a sound |
| • Sleep Mode cycle is over | • Use the SOUNDSPA |
|
| POWER/VOLUME knob to |
|
| turn the SoundSpa OFF, |
|
| then back ON again. |
|
|
|
Peculiar Odor | • If new unit | • Open the water tank cap |
|
| and keep it in a shady and |
|
| cool place for 12 hours |
| • If unit is in use, the odor | • Empty the old water, |
| may be a dirty tank or old | clean the tank and fill |
| tank water | with clean water |
|
|
|
Excessive Noise | • Unit is not level | • Place unit on a flat, |
|
| even surface |
| • Low water level | • Check the water level. Refill |
|
| the tank if the water is low |
|
|
|
White Dust Accumulation | • Hard water used | • Use distilled water and a |
|
| Demineralization Cartridge |
| • Demineralization Cartridge | • Replace Demineralization |
| needs replacement | Cartridge |
|
|
|
10 | 11 |
