HoMedics SPS-060 manual Date & Time SET Procedure, Using the ARM Cuff

DATE & TIME SET PROCEDURE

1.To adjust the date/time, press the Set button.

2.The display will show a blinking number showing the date. Change the month by pressing the button. Each press will increase the number by one

in a cycling manner. Press the Set button again to confirm the entry, and the screen will show a blinking number representing the day of the month.

3.Change the date and time as described in Step 2

above, using the button to change the numbers and the Set button to confirm the entries.

Press thebutton

blinking month

increasing month confirm the entry repeat process to set date and time

13

USING THE ARM CUFF

Very Important: Proper cuff size is critical to accurate measurement.

This monitor comes with a Standard Size arm cuff that fits arms with circumferences of 9”–13” (23 cm – 33 cm).

This cuff is suitable for your use if the colored arrow falls within the solid color line as shown below.

If the arrow falls outside of the solid color line, you will need a cuff with another circumference. Contact HoMedics Consumer Relations at 1-800-466-3342.

Colored Arrow

			FALL	BAND
			ARROW MUST	WITHIN YELLOW	Position cuff
					edge 0.6˝–1.0˝
					(1.5–2.5cm) above elbow.
		UST	FALLBAND
	M
A RROWHIN		Y ELLOW		Center tube over	Fit cuff securely. Allow room for
				middle of arm.	two fingers to fit between the cuff
WIT					and your arm.
					MODEL# PP-BPCUFF5
				Center tube over
				middle of arm

Solid Colored Line

14

BPS-060_B.indd 15-16

5/01/10 1:27 PM