SYMBOLS

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.

 

 

SYMBOL

NAME

EXPLANATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Safety Alert Symbol

Indicates danger, warning or caution. It means

 

 

 

 

 

 

 

attention!!! Your safety is involved.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Read Your Operator’s Manual

Your manual contains special messages to bring

 

 

 

 

 

 

 

attention to potential safety concerns as well as

 

 

 

 

 

 

 

operating and servicing information. Please read all

 

 

 

 

 

 

 

the information carefully to ensure satisfaction and

 

 

 

 

 

 

 

safe use.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wear eye and hearing protection

Wear eye and hearing protection when operating

 

 

 

 

 

 

 

this equipment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Keep bystanders away

Keep all bystanders at least 15 m (50 ft)

 

 

 

 

 

 

 

away.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ricochet

Danger of Ricochet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RPM Decal

Rotational direction and maximum speed of the

 

 

 

 

 

 

 

 

 

 

min -1

 

 

shaft for the cutting attachment.

 

 

 

 

9,000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No Smoking

Do not smoke when mixing fuel or filling fuel tank.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Petrol

Use unleaded petrol intended for motor vehicle use

 

 

 

 

 

 

 

with an octane rating of 87 ([R + M] / 2) or higher.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Oil

Use 2-cycle oil for air-cooled engines.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mix Petrol and Oil

Mix the fuel mix thoroughly and also each time

 

 

 

 

 

 

 

before fuelling.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Switch

On/Off Switch

 

 

 

 

 

 

 

I = ON to Run

 

 

 

 

 

 

 

O = OFF to Stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No blade

Do not install any type of blade on this unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Page 4
Image 4
Homelite F2020, UT70121 manual Symbols, Symbol Name Explanation