Silencer Guard Assembly

1.Remove silencer guard and two screws from the owner’s kit.

2.Attach the silencer guard to the rear housing.

NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing.

3.Install two screws.

4.Tighten screws securely.

REAR

HOUSING

TORQUE

WRENCH

SILENCER

GUARD

SCREWS

BENT END OF

SILENCER GUARD

OPENING IN REAR

HOUSING

Fig. 4

Image 8

Contents

OPERATOR’S Manual Save this Manual for Future Reference Table of Contents Safety Specific Safety Rules for Trimmer USE Symbols Symbol Name Explanation Technical Data Features UnpackingInstructions Packing List for OWNER’S KIT Assembly Assembly InstructionsSee Figure Bolt Silencer Guard Assembly Fuel and Refuelling Operating the TrimmerHandling the Fuel Safely Mixing the Fuel Operation Advancing the StringCutting Tips Grass Deflector Line Trimming CUT- OFF Blade Ignition Switch Starting and StoppingTo Start a Cold Engine To Start a Warm Engine Maintenance Spool Replacement EZ Line TAP Advance SystemNEW PRE-WOUND Spool See Figures 10 Cleaning the Exhaust Port and Silencer String ReplacementSpark Arrester Arrows on Spool Anchor Hole First String Replacing and Cleaning AIR Filter Fuel CAPSparking Plug Storage 1 Month or Longer Troubleshooting Speed. See Figure Idle Speed Screw Mixture Needle Warranty Safety DirectiveGuarantee Statement Rtsa / Rtuk / RTG EC Declaration of Conformity Ryobi Technologies GmbH