5

Disassembly and Cleaning

5.4Disassembly and Cleaning Procedure

5.4.1 Removal of the Outer Covers

1 Remove the two screws and then slide the Optical Cover to the rear side of the machine.

Then holding up the rear side of the Optical Cover and remove it.

NOTE:

Mirror is fitted to the back side of the Optical Cover. Using care not to touch or damage this mir- ror, place the Optical Cover upside down.

2 Holding up and remove the Screen Frame and then disconnect the connector of the Control Panel Board.

Mirror

3 Remove the stopper from the Right Cover and then open the Right Cover.

62

Page 69
Image 69
Kodak 2400DSV service manual Disassembly and Cleaning Procedure, Removal of the Outer Covers