Kodak 2400DSV service manual SE The print function at the time of Toner Empty detection

Contents
6.5.3	S3: Auto Projection Lamp OFF	85
6.5.4	S4: Coin Vender / Foot Switch Setting	85
6.5.5	S5: Fine Mode Setting	86
6.5.6	S6: Paper Tray feed size (MSP 3000 Printer)	86
6.5.7	S7: Machine ID Printing	86
6.5.8	S8: Cycle print mode	87
6.5.9	S9: Nega Contrast Adjustment	87
6.5.10	SA: Posi Contrast Adjustment	87
6.5.11	Sb: Scan Table Stop Position Adjustment (Scan Position)	88
6.5.12	SC: Scan Table Stop Position Adjustment (Reader Position)	88
6.5.13	Sd: Auto image rotation 90 degree rotation function	89
6.5.14 SE: The print function at the time of Toner Empty detection		89
6.6 y mode Operations		90
6.6.1	y2: Auto Paper Source Switching	90
6.6.2	y3: Auto Film Format Select Print	90
6.6.3	y5: Memo Image Masking	90
6.6.4	y6: Prescan Operation	91
6.6.5	y7: Auto Skew Correction Retain	91
6.6.6	yb: Magnification Warning Display	91
6.6.7	yC: Print Reserve Function	91
6.7 o mode Operations		92
6.7.1	o1: Inch/Metric Select	92
6.7.2	o2: N-P Auto Exposure Coarse Adjustment	92
6.7.3	o3: P-P Auto Exposure Coarse Adjustment	93
6.7.4	o4: Scan Speed Adjustment	94
6.7.5	o5: Adjustment of the image area Lengthwise Position	95
6.7.6	o6: Adjustment of the Top and Bottom Frame Black Band Width.. 96
6.7.7	o7: Adjustment of the Right and Left Frame Black Band Width	97
6.7.8	o8: Projection lamp burn out detection (L2) setting	98
6.7.9	oA: Host Driver Setting	98
6.7.10 ob: Vender/Model Name Setting		98
6.8 F mode Operations		99
6.8.1	F1: ROM Version Check	99
6.8.2	F2: Scan Counter	99
6.8.3	F3: Print Counter	99
6.8.4	F4: Counter Clear	99
6.8.5	F5: Control Panel LED Check	99
6.8.6	F6: For Factory use	99
6.8.7	F7: Projection Lamp Voltage Adjustment	100
6.8.8	F8: Reset the Setting Data	101
6.9 b mode Operations		102
6.9.1	b1: Checking the Scan Table Unit Function	102
6.9.2	b2: Scanning mirror operation check	102
6.9.3	b3: For Factory use	102
		v