Kodak 2400DSV service manual Manual Masking → OFF

General Information 3

4.	Masking Key:	When pressed, this key rotates from OFF to the Auto,
		Trimming or Masking functions.
		Each time this key is pressed, selection is switched in
		order of "OFF → Auto Masking → Manual Trimming →
		Manual Masking → OFF."
				Auto Masking:
				The Auto Masking function will omit the frame
				(non-image area) of a printed film image.
		• The previous Centering/Fit setting is applied when-
			ever ON is selected from the OFF state.
		• If OFF is selected from the ON state, Centering/Fit
			is disabled.
		* Auto Masking is not applicable with the Masking or
			Trimming settings.
				Trimming:
				When ON is selected, the image is printed
				(scanned) with the non-image area (frame) auto-
				matically masked.
				Masking:
				Prints only the image outside of the area that is de-
				fined on the Screen.
		• If Trimming is selected from the OFF state, the pre-
			viously entered settings for Centering/Fit and Man-
			ual Masking are applied.
		• From Trimming, when Masking is selected, the
			Centering/Fit setting is disabled and the previous
			settings for the Masking area are applied.
		• The manual masking area will be cancelled when-
			ever OFF is selected from the Masking state.
		* Neither Trimming nor Masking are available through
			the Auto Masking function.
		* Trimming and Masking cannot be set when the
			Scanner is connected to the PC.
5.	Print Mode Key:	Allows you to fine tune the image quality of the print ac-
		cording to the original being used. Rotate between
		Text, Fine and Photo with every press of this key.
		Text:			For use with text images.
		Fine:			For use with lower grades of film.
		Photo:			For use with photo images.

29