Safety Precautions for Inspection and Service
1
7.Do not touch a
•A part marked with the symbol shown on the left and other parts such as the exposure lamp and fusing roller can be very hot while the machine is energized. Touching them may result in a burn.
•Wait until these parts have cooled down before replacing them or any surrounding parts.
8.Make a ground connection at all times (This item may not be effected in USA).
•Be sure to connect a ground wire to the ground terminal even when performing an inspection or repair. Without proper grounding, electrical leakage could result in an electric shock or fire.
•Never connect the ground wire to a gas pipe, water pipe, telephone ground wire, or a lightning conductor.
9.Do not remodel the product.
•Modifying this product in a manner not authorized by the manufacturer may result in a fire or electric shock. If this product uses a laser, laser beam leakage may cause eye damage or blindness.
10.Restore all parts and harnesses to their original positions.
•To promote safety and prevent product damage, make sure the harnesses are returned to their original positions and properly secured in their clamps and saddles in order to avoid hot parts,
•To promote safety, make sure that all tubing and other insulating materials are returned to their original positions. Make sure that floating components mounted on the circuit boards are at their correct distance and position off the boards.
3
