Kodak 2400DSV service manual Operation of the Function Mode, Entering the Function Mode

Function Mode and Adjustment

6.4Operation of the Function Mode

6.4.1 Entering the Function Mode

1.Press the Exposure Mode Select Key, Multi-Print Key and Clear/Stop Key on the control panel at the same time for two seconds or more.

The Multi-Print Display will show "S".

2.Press the Multi-Print Key to select the function mode. Each depression of this key changes the mode into the following.

S→y→o→F→b→S→y....

S:Setting Function 1 y: Setting Function 2 o: Setting Function 3

F:Machine Operation Check Function 1 b: Machine Operation Check Function 2 *c4: for factory use (do not entry)

3.Press the Exposure Adjustment Key to select the function number.

S1→S2→...→S1→	select
y1→y2→...→y1→
o1→o2→...→o1→
F1→F2→...→F1→
b1→b2→...→b1→	select

6

6.4.2 Execution method in F and b mode (except F4, F8 and b6)

1.To perform the function, press the Start key.

83