Kodak 2400DSV service manual

1

Safety Precautions for Inspection and Service

2.Before starting the procedures, be sure to unplug the power cord.

•This product contains a high-voltage unit and a circuit with a large current capacity that may cause an electric shock or burn.

•The product also contains parts that can jerk suddenly and cause injure.

•If this product uses a laser, laser beam leakage may cause eye damage or blindness.

3.Use the specified parts.

•For replacement parts, always use the genuine parts specified in the manufacturer’s Parts Manual. Installing a wrong or unauthorized part could cause dielectric breakdown, overload, or undermine safety devices resulting in possible electric shock or fire.

•Replace a blown electrical fuse or thermal fuse with its corresponding genuine part specified in the manufacturer’s Parts Manual. Installing a fuse of a different make or rating could lead to a possible fire. If a thermal fuse blows frequently, the temperature control system is probably of a problem and action must be taken to eliminate the cause of the problem.

4.Handle the power cord with care and never use a multiple socket.

•Do not brake, crush or otherwise damage the power cord. Placing a heavy object on the power cord, or pulling or bending it may damage it, resulting in a possible fire or electric shock.

•Do not use a multiple outlet to which any other appliances or machines is connected.

•Be sure the power outlet meets or exceeds the specified capacity.

5.Be careful about the high-voltage parts.

•A part marked with the symbol shown on the left carries a high voltage.

Touching it could result in an electric shock or burn. Be sure to unplug the power cord before servicing this part or the parts near it.

6.Do not keep your hands wet when performing the procedures.

•Do not unplug or plug in the power cord, or perform any kind of service or inspection with wet hands. Doing so could result in an electric shock.

2