3

General Information

1. Lamp Illuminance Key:

When this key is pressed together with the Shift

 

Key, the illumination of the screen is adjusted.

 

When this key is continuously pressed, the screen

 

is gradually darkened until it is turned OFF. When

 

any key is pressed then, the illumination returns to

 

the maximum level.

2. Resolution Key:

When this key is pressed together with the Shift

 

Key, the resolution of the Scanner is set.

 

When the Scanner is connected to the Printer: 4H

 

and 6H

 

 

When the Scanner is connected to the PC: 2H, 3H,

 

4H, 6H and 8H

 

* 4H represents 400dpi and 6H represents 600dpi.

3. Job Recall Key:

When this key is pressed together with the Shift

 

Key, the program registration locations (1J, 2J and

 

3J) are called. Each time this key is pressed while

 

the Shift Key is held down, the display is switched

 

in order of 1J → 2J → 3J.

4. Zoom Key:

When this key is pressed together with the Shift

 

Key, the electrical zoom magnification is set.

 

Zoom+:

When this key is pressed together with

 

 

the Shift Key, the magnification is

 

 

increased by an increment of 0.01X

 

 

(up to 2.00X).

 

Zoom clr: When this key is held down together

 

 

with the Shift Key for one second, the

 

 

standard magnification is resumed.

 

Zoom-:

When this key is pressed together with

 

 

the Shift Key, the magnification is

 

 

decreased by a decrement of 0.01X

 

 

(down to 0.50X).

5. Shift Key:

Executes an expansion function when being

 

pressed together with the intended function key.

6. PC/PR Key:

When this key is pressed together with the Shift

 

Key, the connection to the PC or to the Printer is

 

selected.

 

*This key is not valid unless the PC interface kit (optional) is installed.

34

Page 41
Image 41
Kodak 2400DSV service manual Maximum level