Disassembly and Cleaning

5

5.4.2 Replacing of the Projection Lamp

1 Slide the Projection Lamp Unit out.

2 Remove the Projection Lamp from the Lamp Holder.

NOTE

Do not touch with bare hand and extremely hot Projection Lamp immediately after the machine has been turned OFF.

3 Remove the Projection Lamp from the Lamp Socket.

4 Insert a new Projection Lamp so that the mark on its base is facing upwards. Make sure that the new Projection Lamp is inserted securely so that there is no gap between the projection Lamp and the Lamp Socket.

NOTE:

Mark

Do not touch the reflector mirror surface of the Projection Lamp.

Fingerprints, smudges or debris should be wiped clean with a soft, dry cloth.

65

Page 72
Image 72
Kodak 2400DSV service manual Replacing of the Projection Lamp